Weight |
1.0 kg |
Dimensions (hxwxd) |
222 x 214 x 92 mm |
Enclosure Rating |
IP65 |
Enclosure Material |
ABS |
Cable Entries |
4x PG11 (cable 5 to 10 mm² |
Cable Core Size |
Max Conductor Size 2.5 mm² |
Display |
4 Digit LED Measurement Display |
2 Line LCD Message Display | |
Membrane Keypad |
5 Key pillow embossed |
Units of Measurement |
mg/l, g/l, ppm, NTU, FTU |
Operating Temperature |
0 - 50ºC |
Storage Temperature |
-20 to 60ºC |
Location |
Indoor |
Analogue Output |
4-20mA, max load 750 ohm |
Relays |
2 |
Relay Type |
SPCO |
Relay Rating |
5A @ 230VAC, 5A@125VDC |
Type |
High, Low or Fault |
Adjustment |
0-100% Sensor Range |
Weight |
4.5 kg |
Dimensions (hxwxd) |
440 mm x 200 mm x 200 mm |
Enclosure Rating |
IP68 |
Material of Construction |
Black Acetal Co-Polymer, Polypropylene |
Seal Material |
Nitrile |
Cable Entries |
Integral Cable Gland |
Cable Type |
4 core, 2 Twisted Pair, 5mm O/D Polyurethane Coated |
Cable Length |
10 metres standard, 100 metres maximum |
Process Connections |
Inlet and Bypass: 1/2" BSP with 12 mm hosetail |
Outlet: 1/4" BSP with 8 mm hosetail | |
Service Requirement |
Automatic Self Cleaning |
Wiper and Dessicant Replacement yearly (application dependent) |
Principal of Operation |
90º Light Scatter |
ISO 7027 Compliant |
Accuracy |
Better than +/- 2% FSD on real sample |
Resolution |
Dependent on range setting, typcially +/- 2% |
Repeatability |
Better than +/- 1% FSD on real sample |
Response Time |
90% of step change in 2 minutes at 1 l/min |
Flowrate |
0.5 to 5 l/minute |
Low Range |
0-5 to 0-30 NTU |
High Range |
0-50 to 0-500 NTU |
It has been assumed that 1 FTU = 1 NTU for the purposes of this statement |