Features
Microprocessor based modular design
Electrochemical Sensor Technology
Industry standard 4-20mA output
Field adjustable Alarm level
Single point Non-Intrusive calibration
Bright 3 digit LED display
Displays gas concentration in ppm, calibration prompts and sensor fault codes
Suitable for use in Hazardous Location
Description
Model PT395 Series is a microprocessor-based sensor for the detection of toxic gas in ambient air. The unit features easy one-man calibration initiated by simply activating a magnetic switch and applying the gas.
The complete sensor consists of a stainless steel sensor head assembly, a user connection board and a transmitter board assembly. All of the sensor electronics are enclosed in an explosion proof instrument box. The unit’s modular design allows easy maintenance, troubleshooting and high reliability.
The unit provides a fully programmable alarm relay and a linear 4-20mA signal proportional to 0 to 100% of the detection range of the sensor.
The sensor transmitter board includes a three (3) digit LED display for continuous indication of the gas concentration. The calibration mode, alarm and fault status of the sensor are also indicated on the digital display. In the normal operating mode the digital display and 4-20mA reading is proportional to the gas concentration detected by the sensor. In the calibration mode the digital display indicates the calibration status, alarm relay output is inhibited and analog signal output is set to 2 mA to avoid any false alarm by the control monitor. In the sensor fault mode the transmitter drops the output signal to < 1 mA.
Specifications
Sensor Type
Electrochemical
Measuring Ranges
|
Ammonia (NH3) |
50 ppm |
|
Carbon Monoxide (CO) |
100 & 1000 ppm |
|
Chlorine (CL2) |
10 ppm |
|
Chlorine Dioxide (CLO2) |
50 ppm |
|
Ethylene (C2H4) |
100 pm |
|
Ethylene Oxide (C2H4O) |
50 ppm |
|
Hydrogen Chloride (HCL) |
20 ppm |
|
Hydrogen Sulfide (H2S) |
100 ppm |
|
Hydrogen (H2) |
100 & 1000 ppm |
|
Hydrogen Cyanide (HCN) |
30 ppm |
|
Methyl Mercaptan (CH3SH) |
100 ppm |
|
Nitrogen Dioxide (NO2) |
20 ppm |
|
Nitric Oxide (NO) |
100 ppm |
|
Oxygen Deficiency (O2) |
25% |
|
Sulfur Dioxide (SO2) |
50 ppm |
Repeatability
± 2 % Full scale
Zero Drift
< 5% per year
Response Time
T90 < 30 seconds with 100% FS gas applied
Classification
Class I, division 1, Groups B,C & D
Operating Temperature
-4°F to +122°F (-20°C to +50°C)
Operating Humidity
15% to 90% RH, non-condensing
Display
Bright 3 digit LED display
Approvals
CSA / AT
Features
Microprocessor based modular design
Electrochemical Sensor Technology
Industry standard 4-20mA output
Field adjustable Alarm level
Single point Non-Intrusive calibration
Bright 3 digit LED display
Displays gas concentration in ppm, calibration prompts and sensor fault codes
Suitable for use in Hazardous Location
Description
Model PT395 Series is a microprocessor-based sensor for the detection of toxic gas in ambient air. The unit features easy one-man calibration initiated by simply activating a magnetic switch and applying the gas.
The complete sensor consists of a stainless steel sensor head assembly, a user connection board and a transmitter board assembly. All of the sensor electronics are enclosed in an explosion proof instrument box. The unit’s modular design allows easy maintenance, troubleshooting and high reliability.
The unit provides a fully programmable alarm relay and a linear 4-20mA signal proportional to 0 to 100% of the detection range of the sensor.
The sensor transmitter board includes a three (3) digit LED display for continuous indication of the gas concentration. The calibration mode, alarm and fault status of the sensor are also indicated on the digital display. In the normal operating mode the digital display and 4-20mA reading is proportional to the gas concentration detected by the sensor. In the calibration mode the digital display indicates the calibration status, alarm relay output is inhibited and analog signal output is set to 2 mA to avoid any false alarm by the control monitor. In the sensor fault mode the transmitter drops the output signal to < 1 mA.
Specifications
Sensor Type
Electrochemical
Measuring Ranges
|
Ammonia (NH3) |
50 ppm |
|
Carbon Monoxide (CO) |
100 & 1000 ppm |
|
Chlorine (CL2) |
10 ppm |
|
Chlorine Dioxide (CLO2) |
50 ppm |
|
Ethylene (C2H4) |
100 pm |
|
Ethylene Oxide (C2H4O) |
50 ppm |
|
Hydrogen Chloride (HCL) |
20 ppm |
|
Hydrogen Sulfide (H2S) |
100 ppm |
|
Hydrogen (H2) |
100 & 1000 ppm |
|
Hydrogen Cyanide (HCN) |
30 ppm |
|
Methyl Mercaptan (CH3SH) |
100 ppm |
|
Nitrogen Dioxide (NO2) |
20 ppm |
|
Nitric Oxide (NO) |
100 ppm |
|
Oxygen Deficiency (O2) |
25% |
|
Sulfur Dioxide (SO2) |
50 ppm |
Repeatability
± 2 % Full scale
Zero Drift
< 5% per year
Response Time
T90 < 30 seconds with 100% FS gas applied
Classification
Class I, division 1, Groups B,C & D
Operating Temperature
-4°F to +122°F (-20°C to +50°C)
Operating Humidity
15% to 90% RH, non-condensing
Display
Bright 3 digit LED display
Approvals
CSA / AT
境生態檢測儀器/1a便攜式有毒氣體檢測儀.jpg)
本月特價
分享儀器
境生態檢測儀器/gpr-1300—便攜式通用型微量氧分析儀.jpg)
境生態檢測儀器/g150快速響應氧氣分析儀.jpg)
境生態檢測儀器/oxytran-ss 氧氣采樣器.jpg)
境生態檢測儀器/美國華瑞氧氣檢測儀.jpg)
境生態檢測儀器/防爆氧氣傳送器.jpg)
隱藏對比框