你好！歡迎光臨北京中儀友信科技有限公司！已注冊[登錄] 新用戶[免費注冊]
免費銷售電話
就是要儀器網>>產品中心>>氣體檢測儀>>單一氣體檢測儀>>氧氣檢測儀(O2)>>

TY10Model Oxys Atex氧氣分析儀ZX21

TY10

Model Oxys Atex氧氣分析儀

ZX21
Model Oxys Atex氧氣分析儀
訂 貨 號：ZY317131 品    牌：FER 產    地：意大利 市 場 價： 折 扣 價： 發貨周期：現貨或5天內
加入購物車 支付寶購買 詢價留言
分享到：分享到搜狐微博 分享給QQ好友 分享到愛分享 分享到白社會 分享到開心網 分享到人人網 分享到豆瓣 分享儀器
產品描述技術方案相關儀器最新上架商品咨詢使用評價
In situ mounting
Excellent stability.
Very fast response time.
Unaffected by high Sulphur and HCl.
No calibration required.
Absolutely safe.
Approved for zone 1
Inexpensive
 
This analyzer is an excellent solution for oxygen measuring in flue gas in the radiant section at high temperature. It guarantee a very fast response time and an accurate measure which is not affected by the outside air, which normally penetrates between the combustion chamber and the stack. The accurate compensation of the output of the zirconia cell to the temperature of the process eliminate any Zero and Span drift. Specific test carried out on purpose have demonstrated a stability within 0,1% O2 during twelve months.
 
The probe, totally ceramic, is unaffected by the most aggressive atmosphere and with high particulate content, like the combustion chamber of incinerators of contaminated liquids and gases.
 
The very competitive price is compatible with the high performance due to the simple construction of the analyzer.
 
The equipment is composed by the probe (produced in three different lengths), the field transmitter with active barriers in Ex housing and the Flowmeter box. The protection is: EEx d IIC 2G c T4 fully ATEX approved – IP 65. The probe, that has no electric power supply, is an intrinsically safe device. It generates signals lower than the dangerous limits according the safety norms. 
 
The probe mod. 4153 ia is based on a stabilized zirconium oxide cell which is warmed by the temperature of the process. Inside the probe is fitted a B type thermocouple (that does not need compensated cable). The signals of the thermocouple is used by the electronic unit to continuously compensate the output of the zirconia cell to the real temperature of the probe. The flue gas does not circulate inside the probe; it get in contact with the measuring cell on the tip of the probe by diffusion  The probe is connected to the process normally by a 4” 150 RF ANSI flange or similar. The probe can be optionally equipped with a housing which contain the flame arresters, which completely divides the atmosphere inside and outside the furnace.
The microprocessor based field transmitter mod. 8045 is housed in an Ex enclosure with glass window for display reading. Inside the enclosure  a double channel barrier is housed. Magnetic switches that can be operated without opening the housing by using a magnet through the glass window. They enable to manage all functions of the electronic unit.
 
The flow-meters box mod. 60 receives instrumentation air and gas from gas cylinder and drives reference air and test air and gas to the probe.
TECHNICAL SPECIFICATIONS
 
Measuring field: 0,0001-25% O2 by volume.
Precision:±0,5% of the theoretical value or 0,1% O2 (which ever is the greater)
Stability: within 1%.
Response time (T90): zirconia cell < 1", the hole system < 15"
Storage temperature: probe -40 °C/+80°C.
Working temperature: probe 500 ÷ 1600°C for the temperature of the process. Room temp.< 150 °C for the head of the probe; converter and barrier: -20 °C/ +50 °C.
Outputs: analog 4÷20 mA 500 ohm or 0 – 10 V 10 mA linear on one of the following fields: 0÷1999 ppm; 0÷5%;  0÷10%; 0÷25% O2. If the fault alarm is activated the analog output is forced to 2 mA or 0 V.
Alarms Potential free (SPST) contacts, O2 high and low, fault (fail safe) service and calibration in progress. For all contacts 250 V, 1 A max.
Dumper: time constant adjustable between 0 and 900 sec.
Power supply: 115V and 230 V ±10%, 50÷60 Hz, 50 V.A max. Safety according EN 61010
Protection: “c” IIC T4 – IP 65.
EMC According E 50081 and EN 50082
Connecting cable: 4x1.5 shielded. Max length 100 mt.
Probe dimensions: Immersion lengths = 650, 500, 310 mm; Diameter = 27 mm; With suitable extension tubes 1500 mm maximum immersion length can be reached.
Pneumatic connections Inox compression fittings for 6x4 tubing or ¼” NPT-F
Options: Hart & Mod-bus protocols
 
購買提示  

Model Oxys Atex氧氣分析儀

購買提示
1.閣下有任何產品問題請致電400-663-9117.
 2.中儀將提供北京、上海、深圳、南京、重慶送貨上門服務.
3.我們提供Model Oxys Atex氧氣分析儀計量送檢，在簽收前請?jiān)敿?xì)核查資料信息.
4.TY10Model Oxys Atex氧氣分析儀價格根據配置和貨期不同而不同，具體以合同為準.
5.我們?yōu)殚w下提供保修TY10Model Oxys Atex氧氣分析儀售后維修服務，提供后期技術支持.
6.閣下對TY10Model Oxys Atex氧氣分析儀使用方法等有需求時，將為閣下找到Model Oxys Atex氧氣分析儀說明書.
最近瀏覽

FERModel Oxys Atex氧氣分析儀

代理商廠商品牌售后維修區域：北京-上海-浙江-廣東-河南-杭州-鄭州-廣州-深圳-佛山-惠州-廈門-汕頭-臺灣-香港-天津-西安-寶雞-杭州-溫州-常州-無錫-蘇州-南京-鎮江-揚州-南通-合肥-徐州-常熟-石家莊-太原-呼和浩特-沈陽-長春-哈爾濱-南京-合肥-福州-南昌-濟南-鄭州-武漢-長沙-廣州-南寧-?？?成都-貴陽-昆明-拉薩-西安-蘭州-西寧-銀川-烏魯木齊-杭州-沈陽-長春-哈爾濱-濟南-武漢-廣州-南寧-成都-西安-大連-寧波-廈門-青島-深圳-杭州-淮安-連云港-昆山-嘉興-湖州-秦皇島-邯鄲-邢臺-保定-張家口-承德-廊坊-呼和浩特-包頭-鞍山-大慶-錦州-鐵嶺-盤錦-湛江-蕭山-遼寧-淄博-寧夏-綿陽-云南-朝陽-陜西-青海-北海-唐山-吉林-蘇州-昆山-無錫-鎮江-常州-連云港-淮安-淮陰-鹽城-揚州-徐州-宜興-江陰-南通-揚州-上海-滁州-內蒙古-新疆有銷售.北京亦莊開發區，天津?yàn)I海開發區，秦皇島經濟開發區，太原經濟開發區，呼和浩特經濟開發區，沈陽經濟開發區，營口經濟開發區，大連經濟開發區，長春經濟開發區，哈爾濱經濟開發區，虹橋經濟開發區，漕河涇開發區，連云港開發區，南通開發區，昆山開發區，南京開發區，杭州開發區，蕭山開發區，溫州開發區，寧波開發區，蕪湖開發區，合肥開發區，福州開發區，福清融僑開發區，東山開發區，南昌開發區，威海開發區，煙臺開發區，青島開發區，鄭州開發區，武漢開發區，長沙開發區，蘿崗區開發區，廣州南沙開發區，惠州大亞灣開發區，湛江開發區，南寧開發區，重慶開發區，成都開發區，貴陽開發區，昆明開發區，拉薩開發區，西安開發區，蘭州開發區，西寧開發區，銀川開發區，烏魯木齊開發區，石河子開發區，金橋出口加工區，蘇州工業園，寧波大榭開發區，廈門海滄投資區，海南洋浦開發區。

按字母分類： A| B| C| D| E| F| G| H| I| J| K| L| M| N| O| P| Q| R| S| T| U| V| W| X| Y| Z| 熱門一| 熱門二| 熱門三| 熱門四| 熱門五|


中儀主頁 ｜ 聯系中儀 ｜ 了解中儀 ｜ 版權聲明 ｜ 友情鏈接 ｜ 站點地圖 ｜ 廣告服務
CopyRight 2003年創立  版權所有  MRO工業品就是要儀器網
(5)
產品對比產品對比 隱藏對比框
對不起，您還沒有選擇產品