|
934-35 & 934-50 |
Max operating temperature |
66°C (150°F) |
Recommended primer |
Polyken 1027 or 1033A |
Additional mechanical layer |
Polyken 955 or 954 |
Compatible line coatings |
PE, FBE, Tape & Coal Tar |
Recommended pipe preparation |
ST 2 1/2 - ST 3 |
Performance |
AWWA C-209 |
Performance |
AWWA C-209 |
|
934-35 |
934-50 |
Backing |
7 mils (0.178 mm) |
10 mils (0.254 mm) |
Adhesive |
28 mils (0.711 mm) |
40 mils (1.016 mm) |
Backing color (other colors available on request) |
White |
White |
Product Properties |
Test method |
Typical Value #934-35 |
Typical Value #934-50 |
Tensile Strength |
ASTM D1000 |
15 lbs/in (26 N/cm) |
25 lbs/in (44 N/cm) |
Elongation |
ASTM D1000 |
150% | |
Peel Adhesion to Primed Steel |
ASTM D1000 |
225 oz/in (25 N/cm) |
320 oz/in (35 N/cm) |
Cathodic Disbondment |
ASTM G8 |
0.25 in radius (6.4 mm) |
0.38 in radius (9.7 mm) |
Water Vapor transmission |
ASTM E96B |
0.02 perm | |
Water Vapor Transmission Rate |
ASTM F1249 (100°F, 100% RH) |
0.05 g / 100 in2 / 24hr (0.8 g/m2 / 24 hr) | |
Volume Resistivity |
ASTM E257 |
4 x 1014 ohm-cm | |
Dielectric Breakdown |
ASTM D1000 |
650 volts/mil (25.6 kV/mm) |
600 volts/mil ( 23.6 kV/mr |
Dielectric Strength |
ASTM D149 |
23 kV |
30 kV |
Insulation resistance |
ASTM D1000 |
1.4 x 107 MOhm |
2.0 x 107 MOhm |