TY10

PSI絕緣法蘭

ZX21

訂貨號：ZY351324 品牌：英國密析爾MICHELL 產 地：英國市場價：折扣價：發貨周期：現貨或5天內

加入收藏

打印產品信息

產品評價

加入對比

分享到：分享儀器

本月特價

熱賣產品

貨到付款

現場演示

延長保修

終身維修

產品描述技術方案相關儀器最新上架商品咨詢使用評價

Type "E" Gaskets

Type "E" Gaskets extend to the outside diameter of the flange. They feature precision located bolt holes, to automatically center the gasket, and offer maximum protection against foreign material "shorting-out" the flange.

Type "E" gaskets may be ordered in any one of the following configurations:

LineBacker® Sealing Gaskets

GasketSeal® Sealing Gaskets

Neoprene Faced Phenolic Gaskets

Plain Phenolic Gaskets

Red Devil Gaskets

Yellow Jacket Gaskets

Garlock Gaskets

Teflon® Gaskets

When configured as a LineBacker® sealing gasket, the sealing element may be positioned anywhere between the I.D. of the gasket and I.D. of the bolt circle.

Type "F" Gaskets

Type "F" Gaskets are made to fit within the bolt hole circle of the flange. The O.D. of the gasket extends out to the I.D. of the bolt hole circle for good protection against foreign material "shorting-out" the flange. When configured as a LineBacker® sealing gasket, the sealing element may be positioned anywhere between the I.D. and O.D. of the gasket. Type "F" gaskets may be ordered in any one of the following configurations:

LineBacker® Sealing Gaskets

GasketSeal® Sealing Gaskets

Neoprene Faced Phenolic Gaskets

Plain Phenolic Gaskets

Red Devil Gaskets

Yellow Jacket Gaskets

Garlock Gaskets

Teflon® Gaskets

When configured as a LineBacker® sealing gasket, the sealing element may be positioned anywhere between the I.D. of the gasket and I.D. of the bolt circle.

Type "D" Gaskets

Type "D" Gaskets are available for RTJ flanges but the LineBacker® sealing gasket is an excellent alternative to "D" gaskets because the sealing element may be positioned anywhere between the I.D. of the gasket and I.D. of the ring groove.

PSI Isolating Gaskets - Standard 1/8" Thick
GasketSeal®

GasketSeal sealing gaskets are considered one of the most effective methods for sealing and isolating flanges of all types. The gasket consists of two molded semi "O" rings (with precise crown-to-void ratio) mounted in grooves on opposite sides of an isolating retainer. While maintaining all the advantages of a full "O" ring seal, the semi "O" ring seal eliminates the need for a sealing groove in the flange face to reduce problems associated with alignment. GasketSeal sealing gaskets incorporate near zero "m" and "y" factors that make it possible to effect a positive seal without tremendous bolt loads required with flat gaskets. GasketSeal sealing gaskets are available in a wide variety of retainer and sealing element combinations for matching gaskets to service and environmental conditions. Refer to the chart for the GasketSeal sealing gasket temperature ranges and material compatibilities. More information: PSI GasketSeal Sealing Gaskets

LineBacker®

LineBacker sealing gaskets utilize a patented rectangular sealing element, referred to as a "quad" ring, in combination with a unique groove design to effectively seal and isolate flanges of all types. With the unique "quad" ring design, elastic memory is provided for elastomers not normally associated with this characteristic. Materials such as polyimide, TFE (Teflon) and vinyl may therefore be used as sealing elements. which dramatically increases the options available for matching gasket materials to service and environmental conditions. This greater variety of materials also provides excellent temperature and chemical range compatibility. LineBacker sealing gaskets incorporate near zero "m" and y" factors that make it possible to effect a positive seal without tremendous bolt loads that are required with flat gaskets. Refer to the chart for LineBacker sealing gasket temperature range and material compatibilities. More information: PSI PSI LineBacker Flange Sealing Gaskets and PSI LineBacker™ Zero, 250 & 251 Sealing Gaskets

Neoprene Faced Phenolic

Neoprene Faced Phenolic gaskets have been used as standard "flat" isolating gaskets in the oil and gas industries for many years. Soft neoprene rubber sheets are factory applied to both sides of a laminated phenolic retainer providing an effective sealing surface. The temperature limit of these gaskets is approximately +175° F (80°C). Note: Due to improved sealing characteristics and retainer / seal element options, LineBacker or GasketSeal sealing gaskets should be considered in lieu of neoprene faced phenolic gaskets whenever possible.

Flat Gaskets

Flat Gaskets are used in special applications such as elevated temperatures that often require materials such as Red Devil or Yellow Jacket. Please contact Corrosion Control Products Company for additional information on available options.

Suggested Flange Isolation Material Compatibility

Medium	Retainer	Seal	Sleeve	Washer	Temp. Range °F	Temp. Range °C
Acetone	Phenolic	EPDM	Mylar	Phenolic	+32 to +80	0 to +27
Air	G-10	Nitrile	Mylar	Phenolic	-65 to +225	-54 to +107
Ammonia, dry	G-10	Teflon	Mylar	G-10	-65 to +220	-54 to +104
Ammonia, wet***	G-10	Teflon	Mylar	G-10	+32 to +100	0 to +38
Bleach	G-10	Teflon	Mylar	G-10	+32 to +80	0 to +27
Butylene (butidiene)	G-10	Teflon	G-10	G-10	+32 to +100	0 to +38
Carbon dioxide	G-10	Nitrile	Mylar	G-10	+32 to +150	0 to +66
Caustic soda (NaOH)	Consult Corrosion Control Products Company
Cryogenic	G-10	Teflon	G-10	G-10	-300 to +280	-184 to +138
Ethanol	G-10	Nitrile	Mylar	G-10	+32 to +100	0 to +38
Ethylene (ethene)	G-10	Teflon	G-10	G-10	+32 to +80	0 to +27
Fuel Oil	G-10	Viton	Mylar	G-10	-20 to +280	-29 to +138
Gas, natural	Phenolic	Nitrile	Mylar	Phenolic	-65 to +220	-54 to +104
Gas, sour	Phenolic	Viton	Mylar	Phenolic	-20 to +220	-29 to +104
Gasoline	G-10	Teflon	Mylar	G-10	-65 to +225	-54 to +107
Hydrogen	G-10	Nitrile	Mylar	G-10	-65 to +250	-54 to +121
Jet fuel	G-10	Viton	Mylar	G-10	-20 to +225	-29 to +107
LNG	G-11	Teflon	G-10	G-10	-300 to +100	-184 to +38
Mercaptan	G-10	Teflon	G-10	G-10	-20 to +80	-29 to +27
Methanol	G-10	Teflon	Mylar	G-10	+32 to +100	0 to +38
MTBE	G-10	Special Nitrile	G-10	G-10	+32 to +80	0 to +27
Nitrogen	Phenolic	Nitrile	Mylar	Phenolic	-65 to +220	-54 to +104
Oil, crude	G-10	Viton	Mylar	G-10	-20 to +280	-29 to +138
Oxygen**	G-10	Teflon	G-10	G-10	-65 to +250	-54 to +121
Pentane	G-10	Teflon	G-10	G-10	+32 to +80	0 to +27
Propane	G-10	Nitrile or Teflon	G-10	G-10	+32 to +80	0 to +27
Propylene	G-10	Viton	G-10	G-10	+32 to +80	0 to +27
Sewage	G-10	Viton	Myla	G-10	-20 to +280	-29 to +138
Spent liquor	G-10	Teflon	G-10	G-10	+32 to +100	0 to +38
Steam*	Consult Corrosion Control Products Company
Styrene	G-10	Teflon	G-10	G-10	+32 to +80	0 to +27
Sulfur, molten	G-10	Teflon	G-10	G-10	+32 to +280	0 to +138
Toluene	G-10	Viton or Teflon	G-10	G-10	+32 to +150	0 to +66
Water, hot	G-10	Nitrile	Mylar	G-10	+175 to +250	+79 to +121
Water, potable	G-10	Nitrile	Mylar	G-10 or Phenolic	+32 to +250	0 to +121
Water, sea	G-10	Nitrile	Mylar	G-10 or Phenolic	+32 to +250	0 to +121
White liquor	G-10	Teflon	G-10	G-10	+80 to +280	+27 to +138

These are organic materials that will feed a fire if a leak occurs and an ignition source exists.
Ammonia (wet) - Data to +100°F (+38°C) only (same materials as dry).

For pipe diameters over 24" or ANSI Class pressure ratings of 600# or greater, use G-10 sleeves and G-10 washers where temperatures and other conditions permit.

General Note:
The foregoing performance data are intended as guidelines only. Performance suitability for any specific applications should be determined by the user. Variation in temperature, pressure, concentration or mixtures acting synergistically may preclude suggested service use. Material selection is at the sole risk of the user. Consult with Corrosion Control Products Company for specific applications. PSIs responsibilities will be limited to those listed in the PSI standard warranties.

Also see PSI Flange Isolation Kits and PSI Isolating Sleeves & Washers.

PSI Flange Isolation Ordering Guide

For all Flange Isolation Kit sizes,
specify the following:

For Flange Isolation Kits over 24",
also specify:

Quantity

Nominal Pipe Size

ANSI Class
150#
300#
400#
600#
900#
1500#
2500#

Gasket Type
E = With Bolt Holes
F = Ring (No Bolt Holes)
D = For RTJ Flanges

Gasket Style
GS = GasketSeal
LB = LineBacker
NP = Neoprene Faced Phenolic
PP = Plain Phenolic
RD = Red Devil
YJ = Yellow Jacket
GL = Garlock
TF = Teflon

Retainer
Phenolic
G-3
G-7
G-10
G-11

Seal Element
Neoprene
Nitrile
Viton
EPDM
Teflon (LB only)

Washers
SW = Single Washers
DW = Double Washers

Washer Material
1 PC = 1 Piece Acetal
Phen = Phenolic
G-3
G-7
G-10
G-11

Sleeve
Poly = Polyethylene
Mylar
Nomex
Phenolic
G-7
G-10
G-11

Gasket I.D. Flange

Type
W = Weld Neck
S = Slip On
R = RTJ
BX = API BX
RX = API RX
O = Other (denote Specs and Table)

Flange I.D.

Flange O.D.

Flange Thickness

Number of Bolts

Bolt Diameter

Bolt Hole Diameter

Bolt Circle Diameter

Sleeve Length Pipe I.D.

Steel Sleeve I.D.
(for concrete pipe)

Product In Line

AWWA Class & Table
(or other similar standard)

PSI絕緣法蘭
購買提示
1.閣下有任何產品問題請致電400-663-9117.
2.中儀將提供北京、上海、深圳、南京、重慶送貨上門服務.
3.我們提供PSI絕緣法蘭計量送檢，在簽收前請詳細核查資料信息.
4.TY10PSI絕緣法蘭價格根據配置和貨期不同而不同，具體以合同為準.
5.我們?yōu)殚w下提供保修TY10PSI絕緣法蘭售后維修服務，提供后期技術支持.
6.閣下對TY10PSI絕緣法蘭使用方法等有需求時，將為閣下找到PSI絕緣法蘭說明書.

產品分類

建筑工程及物探

腐蝕控制產品

主推產品

同類品牌產品

DMT152露點變送器

旋轉盤式稀釋器

Condumax II

EA2-TX露點變送器

英國密析爾MICHELLPSI絕緣法蘭

代理商廠商品牌售后維修區域：北京-上海-浙江-廣東-河南-杭州-鄭州-廣州-深圳-佛山-惠州-廈門-汕頭-臺灣-香港-天津-西安-寶雞-杭州-溫州-常州-無錫-蘇州-南京-鎮江-揚州-南通-合肥-徐州-常熟-石家莊-太原-呼和浩特-沈陽-長春-哈爾濱-南京-合肥-福州-南昌-濟南-鄭州-武漢-長沙-廣州-南寧-海口-成都-貴陽-昆明-拉薩-西安-蘭州-西寧-銀川-烏魯木齊-杭州-沈陽-長春-哈爾濱-濟南-武漢-廣州-南寧-成都-西安-大連-寧波-廈門-青島-深圳-杭州-淮安-連云港-昆山-嘉興-湖州-秦皇島-邯鄲-邢臺-保定-張家口-承德-廊坊-呼和浩特-包頭-鞍山-大慶-錦州-鐵嶺-盤錦-湛江-蕭山-遼寧-淄博-寧夏-綿陽-云南-朝陽-陜西-青海-北海-唐山-吉林-蘇州-昆山-無錫-鎮江-常州-連云港-淮安-淮陰-鹽城-揚州-徐州-宜興-江陰-南通-揚州-上海-滁州-內蒙古-新疆有銷售.北京亦莊開發區，天津濱海開發區，秦皇島經濟開發區，太原經濟開發區，呼和浩特經濟開發區，沈陽經濟開發區，營口經濟開發區，大連經濟開發區，長春經濟開發區，哈爾濱經濟開發區，虹橋經濟開發區，漕河涇開發區，連云港開發區，南通開發區，昆山開發區，南京開發區，杭州開發區，蕭山開發區，溫州開發區，寧波開發區，蕪湖開發區，合肥開發區，福州開發區，福清融僑開發區，東山開發區，南昌開發區，威海開發區，煙臺開發區，青島開發區，鄭州開發區，武漢開發區，長沙開發區，蘿崗區開發區，廣州南沙開發區，惠州大亞灣開發區，湛江開發區，南寧開發區，重慶開發區，成都開發區，貴陽開發區，昆明開發區，拉薩開發區，西安開發區，蘭州開發區，西寧開發區，銀川開發區，烏魯木齊開發區，石河子開發區，金橋出口加工區，蘇州工業園，寧波大榭開發區，廈門海滄投資區，海南洋浦開發區。

請輸入您的E-mail地址免費獲取中儀網電子雜志：

TY10PSI絕緣法蘭ZX21

PSI絕緣法蘭

PSI絕緣法蘭

英國密析爾MICHELLPSI絕緣法蘭