TY10

TI-MINIMAX螺栓張力計

ZX21

訂貨號：zy425991 品牌：美國測可賴產 地：美國市場價：折扣價：發貨周期：現貨或5天內

加入收藏

打印產品信息

產品評價

加入對比

分享到：分享儀器

本月特價

熱賣產品

貨到付款

現場演示

延長保修

終身維修

產品描述技術方案相關儀器最新上架商品咨詢使用評價

產品描述：

The TI-MINIMAX can measure the elongation very accurately in fasteners of virtually any material from 1/2 inch to 4 feet in length. The measurement is achieved by determining the change in the transit time, of an ultrasonic shock wave along the length of the fastener as the fastener is tightened by any method. The on-board microcomputer automatically interprets this time measurement to display the time(nanoseconds), elongation, load, stress, or %strain from stretching a fastener.

The first cost effective ultrasonic solution available on the market.

Visually compare the unloaded to the loaded waveform.

Display Options - RF, Rectified, Large Digits with Limits Bar.

Effectively monitor your bolts during periodic shutdowns over the service life of the fastener.

Measurement quanities - Time (nanoseconds), Elongation, Load, Stress, and %Strain.

Display Resolution - 1/8" VGA 240 x 160 pixels.

Stores 8000 readings and waveforms in multiple groups.

Built-in Linear regression or vector for optimizing load measurements.

The Auto Set feature automatically optimizes detection and adjusts display.

Hi/Lo alarm tolerance limits work in conjunction with the data port and external pump shut-off device.

技術參數：

Measuring Range	From 1” to 48” (25.4mm to 122cm) bolts
Time	Nanoseconds
Elongation	Change in length (inches/millimeters)
Load	Force load applied (pounds kIP or kN Killonewtons)
Stress	Force for unit area stress applied (pounds kPSI or megapascals MPa)
Strain %	percentage strain applied (inches per inch or millimeters per millimeter)
Resolution	+/- .00001 inches (0.0001 mm)
Velocity Range	.0492 to .3936 in/ms 1250 to 9999 meters/sec
Calibration	Fixed, Single, and Two point zero calibration options. Select bolt material types from a preset or custom list.
Units	English & Metric / Fahrenheit & Centigrade
Measuring Modes	Pulse-Echo (standard) Pulse-Echo w/Gate (fine adjust)
Pulser	Square wave pulser with adjustable pulse width (spike, thin, wide)
Receiver	Manual or Auto Set gain control with 40dB range
Timing	10 bit 250 MHz digitizer
Display Modes	A-Scan - Rectified +/- (half wave view), or RF (full waveform view)
Alarm Limits	Set hi and lo tolerances with audible beeper, viewable scan bar, and visual LEDs
Data Logger (Internal)	Total of 8,000 readings, multiple bolt groups. Stores both waveform views, nanoseconds, elongation, load, stress, and strain for each reading
Memory	16 megabit non-volatile ram
Transducer	Single Element (1 to 10 MHz & 1/8” to 1” diameters)
Transducer Cable Lenght	10 foot (custom lengths available, inquire)
Temperature Probe	for automatic temperature compensation
Setup Memory	64 custom user defined setups. Factory setups can also be edited by the user
Gate	Gate used to fine adjust where the detection point occurs
Auto Set	Locates the detection signal, optimizes the gain setting, and adjusts the overall display to show the waveform and detection point automatically
Field Calibration	Vector & linear regression. Includes Factory calibration traceable to national standards
Power	Three 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
Dimensions	Width (2.5in/63.5 mm) Height (6.5 in/165 mm) Depth (1.24 in/31.5 mm)
Weight	13.5 ounces (with batteries)
Operating Temperature	14 to 140F (-10C to 60C)

TI-MINIMAX螺栓張力計
購買提示
1.閣下有任何產品問題請致電400-663-9117.
2.中儀將提供北京、上海、深圳、南京、重慶送貨上門服務.
3.我們提供TI-MINIMAX螺栓張力計計量送檢，在簽收前請詳細核查資料信息.
4.TY10TI-MINIMAX螺栓張力計價格根據配置和貨期不同而不同，具體以合同為準.
5.我們?yōu)殚w下提供保修TY10TI-MINIMAX螺栓張力計售后維修服務，提供后期技術支持.
6.閣下對TY10TI-MINIMAX螺栓張力計使用方法等有需求時，將為閣下找到TI-MINIMAX螺栓張力計說明書.

美國測可賴TI-MINIMAX螺栓張力計

代理商廠商品牌售后維修區域：北京-上海-浙江-廣東-河南-杭州-鄭州-廣州-深圳-佛山-惠州-廈門-汕頭-臺灣-香港-天津-西安-寶雞-杭州-溫州-常州-無錫-蘇州-南京-鎮江-揚州-南通-合肥-徐州-常熟-石家莊-太原-呼和浩特-沈陽-長春-哈爾濱-南京-合肥-福州-南昌-濟南-鄭州-武漢-長沙-廣州-南寧-?？?成都-貴陽-昆明-拉薩-西安-蘭州-西寧-銀川-烏魯木齊-杭州-沈陽-長春-哈爾濱-濟南-武漢-廣州-南寧-成都-西安-大連-寧波-廈門-青島-深圳-杭州-淮安-連云港-昆山-嘉興-湖州-秦皇島-邯鄲-邢臺-保定-張家口-承德-廊坊-呼和浩特-包頭-鞍山-大慶-錦州-鐵嶺-盤錦-湛江-蕭山-遼寧-淄博-寧夏-綿陽-云南-朝陽-陜西-青海-北海-唐山-吉林-蘇州-昆山-無錫-鎮江-常州-連云港-淮安-淮陰-鹽城-揚州-徐州-宜興-江陰-南通-揚州-上海-滁州-內蒙古-新疆有銷售.北京亦莊開發區，天津濱海開發區，秦皇島經濟開發區，太原經濟開發區，呼和浩特經濟開發區，沈陽經濟開發區，營口經濟開發區，大連經濟開發區，長春經濟開發區，哈爾濱經濟開發區，虹橋經濟開發區，漕河涇開發區，連云港開發區，南通開發區，昆山開發區，南京開發區，杭州開發區，蕭山開發區，溫州開發區，寧波開發區，蕪湖開發區，合肥開發區，福州開發區，福清融僑開發區，東山開發區，南昌開發區，威海開發區，煙臺開發區，青島開發區，鄭州開發區，武漢開發區，長沙開發區，蘿崗區開發區，廣州南沙開發區，惠州大亞灣開發區，湛江開發區，南寧開發區，重慶開發區，成都開發區，貴陽開發區，昆明開發區，拉薩開發區，西安開發區，蘭州開發區，西寧開發區，銀川開發區，烏魯木齊開發區，石河子開發區，金橋出口加工區，蘇州工業園，寧波大榭開發區，廈門海滄投資區，海南洋浦開發區。

請輸入您的E-mail地址免費獲取中儀網電子雜志：

TY10TI-MINIMAX螺栓張力計ZX21

TI-MINIMAX螺栓張力計

TI-MINIMAX螺栓張力計

美國測可賴TI-MINIMAX螺栓張力計